Trailer Parts

• Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
• 3 folds
• 35/55mm diameter
• 80mm length
• Rubber material
• Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area
• These bellows are vented to allow air and water to be forced out on compression when the brakes are applied

Price: £15 + VAT

• Barrel Lock & Key Set for Knott Avonride Coupling Heads
• Replacement coupling barrel lock and key set for Knott-Avonride coupling heads up to 3500Kg
• Lock cover cap, two keys, lock housing pin and fitting instructions supplied
• Thousand of different key combinations
• Supplied with 2 years warranty

Price: £8.50 + VAT

3000Kg Heavy Duty Pressed Steel 50mm Coupling for 50mm Round Tube Drawbars

• 2 x M12 bolts (min 10.9)
• Application up to 3000kg
• Suitable for use as a replacement for AL-KO AK300, Ifor Williams P0528
• Can be used as an alternative for Knott Avonride 575003, Ifor Williams PO0301
• Heavy duty pressed steel construction, zinc plated finish
• Mounting holes in the side and top surfaces
• R55 approved (D27, S150)
• With wear and correct attachment indicator
• Supplied without lock. 

Price: £41.67 + VAT

• Used on GD, GX, GP & GH plant trailers, HB401/403/505/506/510/511/610, HBX403/506/511/510XL horse trailers
• Equivalent to Ifor Williams part P1192
• UV stabilised

Price: £7.50 + VAT

• P1193 Ifor Williams HB & HBX, Tiltbed Ramp, Beavertail 6′ Ramp, GP Ramps, GX Ramps, Superseded P1191, parts are interchangeable
• Fixings: 2 M10x20 studs on ball joints
• Stroke (min): 247
• Extension Force: 2100N
• Compression Force: 3640N
• Dimensions on drawing:
  • A = 36
  • B = 28
  • C = 14
  • D = 345
  • E = 630

Price: £32.50 + VAT

• P1189 fitted to Ifor Williams CT166/167 car transporter and GD metric trailers
• Fixings: 2 M10x20 studs on ball joints
• Stroke (min): 247
• Extension Force: 1700N
• Compression Force: 2910N
• Dimensions on drawing:
  • A = 36
  • B = 28
  • C = 14
  • D = 345
  • E = 630

Price: £35 + VAT

• P1188 fitted to Ifor Williams livestock trailers with Easyload deck system
• Fixings: 2 M8x20 studs on ball joints
• Stroke (min): 135
• Extension Force: 1200N
• Compression Force: 1950N
• Integral protective shroud 172×26
• From Stabilus
• Dimensions on drawing:
  • A = 32
  • B = 22
  • C = 10
  • D = 216
  • E = 385

Price: £25 + VAT

1700kg Pressed Steel 35mm Coupling for 35mm Round Tube Drawbars

• 2 x M12 bolts (min 10.9)
• Application up to 1700kg
• Suitable for use as a replacement for:
  • AL-KO AK160A
• Heavy duty pressed steel construction, zinc plated finish
• 54-57mm mounting holes in the side
• R55 approved (D15.8, S100)
• With wear and correct attachment indicator
• Supplied without lock.

Price: £37.50 + VAT

• Hitch / Coupling damper suitable for Knott KFG35
• Quality dampers from German manufacturer Stabilus
• Dimensions on drawing (mm);
  • A1 – 30
  • A2 – 39
  • B – 14
  • C – 29
  • D -10
  • F1 – M10
  • G – 325
  • H – 590
• Tension Force In N 5600
• Compression Force In N 2200

Price: £40 + VAT

• Hitch / Coupling damper suitable for Knott KF27A/KFG30 (12mm) trailers
• Quality over-run dampers from German manufacturer Stabilus
• Dimensions on drawing (mm);
  • A1 – 18
  • A2 – 24
  • B – 12
  • C – 29
  • D -10
  • F1 – M10
  • G – 320
  • H – 530
• Tension Force In N 5200
• Compression Force In N 1300

Price: £37.50 + VAT

• Hitch / Coupling damper suitable for Knott KF/KR17-20 trailers
• Quality over-run dampers from German manufacturer Stabilus
• Dimensions on drawing (mm);
  • A1 – 26
  • A2 – 24
  • B – 12
  • C – 29
  • D -10
  • F1 – M10
  • G – 325
  • H – 530
• Tension Force In N 5100
• Compression Force In N 1250

Price: £37.50 + VAT

• Hitch / Coupling damper suitable for Knott KF/KR13 C/D trailers
• Quality over-run coupling dampers from German manufacturer Stabilus
• Dimensions on drawing (mm);
  • A1 – 18
  • A2 – 24
  • B – 12
  • C – 29
  • D -10
  • F1 – 10
  • G – 320
  • H – 530
• Tension Force In N 2100
• Compression Force In N 550

• M30x1.5mm universal one shot hub stake nut
• Suitable for IFOR WILLIAMS brake drums (since 1997)
• Socket required 46mm

Price: £6.25 + VAT

• M24x1.5mm universal one shot hub nut
• Suitable for ALKO, Knott, Avonride and BPW brake drums
• Socket required 32mm

Price: £6.25 + VAT

• Brake shoe spring set for Auto Reverse Knott 250×40 drums
• 2 retaining springs
• 4 tensioning springs (2 long and 2 short)

Price: £6 + VAT

• Brake shoe spring set for Auto Reverse Knott 200×50 drums
• 2 retaining springs
• 4 tensioning springs (2 long and 2 short)

Price: £6 + VAT

• 13 Pin plastic socket used on caravan and trailer applications
• Body style: Plastic
• Pins: Nickel plated with screw terminals. Nicked plated pins can provide better electrical connection and superior corrosion resistance than standard brass pins
• Rear gasket included: MP99FB
• Complies with ISO11446

Price: £5 + VAT

• Red PVC breakaway cable fitted with a clevis and pin instead of a split ring
• Suitable for Ifor Williams applications
• Red PVC cable
• 1m x 3mm
• Vehicle fitting: carabiner

Price: £6 + VAT

• Red breakaway cable suitable for braked trailers and caravans
• 3mm x 1m red PVC coating
• Vehicle fitting: carabiner
• Trailer fitting: burst ring

Price: £6 + VAT

• M8 x 1.25 domed brake cable nut

Price: £2.50 + VAT